Vexten: The most advanced electrical engineering suite.

Take the power of desktop engineering software directly to your mobile device. Design, audit, and optimize medium and low voltage installations with pinpoint precision. Works 100% offline.

100%100% Offline
350++350 Formulas
134134 Tools
PDFPDF Reports

Technical Capabilities & Engineering Modules

Explore over 260 real tools, calculators, and tables integrated into Vexten App.

01
Conductors & Raceways
Includes Voltage Drop (Single-Phase, Three-Phase & DC), Neher-McGrath Ampacity, Max AWG & mm² Cable Size, Resistance vs Temperature, Joule Losses, Cu / Al / CCA Material Table, and Flexible Cords.
02
Conduit Fill & Cable Trays
Includes Conduit Fill (EMT, IMC, RMC, PVC), Cable Tray Occupation, Cable Bending Radius, Pulling Tension, Conduit Support Spacing, Pipe Bending, and Underground Trench Banks.
03
Protections, TCC & Arc Flash
Includes Arc Flash Hazard & PPE Labeling, Protection Coordination (TCC Curves), Max & Min Short-Circuit, Breaker Selection (LSIG Trip Units), Selectivity Sizing, Grounding Grids, and SPD / GFCI Protection.
04
Electric Motors & VFDs
Includes Full Load Amps (FLA) & Locked Rotor Amps (LRA), Direct-On-Line, Star-Delta & Soft-Starter Starting, Variable Frequency Drives (VFD), Power Factor Correction, Torque-Speed Curves, and IE1 to IE4 Efficiency.
05
Transformers & Substations
Includes Transformer Sizing (Dry & Oil-Filled), Phasor Analysis & Vector Groups (Dyn11, Ynd1), Short-Circuit Impedance, Tap Settings, Parallel Transformers, and K-Factor for Non-Linear Loads.
06
Technical Lighting
Includes Zonal Cavity Lumen Method, Point-by-Point Lux Sizing, Native Mobile Sensor Lux Meter, Recommended Lighting Level Tables per Area, and CCT / CRI Color Rendering Guides.
07
Electronics & Components
Includes OpAmps, NE555 Timers, LM78xx Voltage Regulators, BJT/MOSFET Switches, Resistor & SMD Color Codes, RLC Impedance, and Hardware Pinouts (Arduino, ESP32, Raspberry Pi, RJ45, USB-C, RS485).
08
Thermal & Heating
Includes Fluid & Tank Heating, Solid Heating, Element Watt Density, Pipe Heat Tracing, Thermal Pipe Insulation, and Thermal Material Property Tables.
09
Solar Energy & Batteries
Includes PV String Sizing & MPPT Controllers, Peak Sun Hours (PSH), Optimal Solar Tilt Angle, Battery Banks (LiFePO4, AGM, Gel), Runtime Autonomy, and Solar Inverter Sizing.
10
Engineering Converters
Includes Current Density, Fluid Flow Rate, Number Systems (Binary, Octal, Hex), AWG to mm² Conversion, Photometric Units, and Delta-Star Converters.
Módulo Nativo

Field Inspection & Audits

Includes Native Markup Editor for panel photos, drawing technical annotations, code-based severity categorization, and audit log tracking.

Exportación Formal

PDF Calculation Reports

Instant export of formal technical PDF calculation reports featuring step-by-step formulas, phasor diagrams, project metadata, and letterhead customization.